Threading the machine is something that's pretty basic, but it's a little different for every machine. It is very important to refer to your manual when you first learn the procedure. If the threading isn't correct, nothing else is going to work.
Here's the basic rundown of threading a sewing machine. Remember, every machine is different. It's just a general idea.
1. Put your thread spool on the spindle on top of the machine.
1a. Vertical spindle or post-position the spool so that the thread runs clockwise as you sew it.
1b. Horizontal spindle-the spool is held in place by the end cap. If your spool has a small cut in it, be sure to cut it to the right.
NEWBIE TIP: If your spool is brand new and there are labels covering the holes, completely uncover the holes that allow the spool to rotate easily.
2. Pull the thread to the left of the spindle and follow your first thread guide.
3. Drag the thread down through your voltage guide. (It is extremely important to have your foot presser UP when threading your machine.)
4. Drag thread through the next thread guide.
5. Insert the thread through the take-up lever.
6. Bring the thread through the next thread guide.
7. And finally! -Thread the needle. Most of the needles are threaded from front to back, some from left to right.
Practice threading on your machine. It's not a small job if you're a beginner, but after a while, you'll be able to do that with your eyes closed.
Check more details at https://www.krafezee.com/